Abstract
Rational use of energy in buildings leads to a concept of active energy façades such as transparently insulated massive walls, solar thermal or PV façades, advanced glazings for daylighting purposes or double ventilated façades. The paper is concerned with the façade-integrated solar thermal collectors concept for water heating in the existing building stock in the Czech Republic (panel and brick blocks of flats), which are ready for major renovations. Thermal behavior of façade collectors compared with standard roof-located collectors in solar DHW systems was investigated. Façade solar collectors should have an area increased by approximately 30% to achieve the usual 60% solar fraction compared with conventional roof solar collectors with a 45° slope. Further increases in the solar fraction above 70% lead to a required area comparable with roof collectors but with less stagnation periods compared with roof collectors. Application of façade solar collectors affects the indoor comfort in buildings in a reasonable range. Indoor temperatures increase by no more than 1 K in all investigated configurations. Building behavior is not strongly affected by façade collectors when sufficient insulation layers are present.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
