Abstract
This paper described extrudability and bonding strength of copper (TPC) clad aluminum alloy (pure Al, Al3003, Al5005, and Al7072) composites produced by indirect extrusion at 350°C with extrusion ratio of 21.39. Conical typed die with semi angle of 30°. Carbon oil was used to reduce the friction between billet/sleeve and billet/die. Maximum extrusion pressure was estimated to 491MPa for the Cu/Al, 714MPa for the Cu/Al3003, 820MPa for the Cu/Al5005, and 743MPa for the Cu/Al7072 alloy composites. No surface fracture was observed. From SEM observation, diffusion layer between the sheath material and the core material of extruded composites is observed and its thickness was measured to about 1.5㎛. The bonding strength was estimated to 65MPa for the Cu/Al, 89.3MPa for the Cu/Al3003, 70MPa for the Cu/Al5005, and 75MPa for the Cu/Al7072 alloy composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
