Abstract
Chemical doping is an effective way to increase the conductivity of graphene. Despite the efforts made by many to achieve p-doping, mainly on CVD graphene, by using a variety of oxidant agents, there is still space to evaluate and optimize methodologies to further reduce the sheet resistance while maintaining high optical transparency. In this study, we developed “new” routes to dope graphene heavily using thionyl chloride that is known to act as chlorinating agent. It was found that, in addition to the nucleophilic reactions replacing oxygen with chlorine, the thermal (T ≥ 120 °C) and pyridine-catalytic activations of the SOCl2 chemistry result in more p-doping functionalities in the graphene basal plane. A sheet resistance value of 18 Ω/□ was obtained for a 6-layer stacked graphene films with an optical transmittance of 85% at 550 nm. Furthermore, the possibility offered by the plasma oxidation of graphene in a controlled way, allows to introduce in the graphene basal plane the right amount of epoxy and hydroxyl defects so as to maximize the dopant functionalization and, hence, the carrier density, without affecting significantly the carrier mobility. This route allowed to reach a minimum sheet resistance value of 120 Ω/□ for a single layer graphene with 97.5% optical transparency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.