Extraction of Underwater Acoustic Signals across Sea–Air Media Using Butterworth Filtering

Abstract

Direct wireless communication through sea–air media is essential for constructing an integrated communication network that spans space, air, land, and sea. The amplitude of acoustically induced micromotion surface waves is much smaller than the noise interference in complex sea states, making the accurate extraction of these signals from the raw signals detected by an FMCW millimeter-wave radar a major challenge. In this paper, Butterworth filtering is used to extract underwater acoustic signals from the surface waves detected by radar. The physical processes of the channel were simulated theoretically and verified experimentally. The results demonstrate a fitting coefficient of 0.99 between the radar-detected water surface waves and the simulation outcomes, enabling the effective elimination of noise interference and the extraction of acoustically induced micromotion signals in environments with a signal-to-noise ratio (SNR) of −20 dB to −10 dB. Experiments modifying frequency and linear frequency modulation have verified that the usable frequency range for underwater acoustic signals is at least 400 Hz, meeting the frequency requirements of Binary Frequency Shift Keying (2FSK) modulation encoding methods. This research confirms the accuracy of the simulation results and the feasibility of filtering and extracting underwater acoustic signals, providing a theoretical basis and an experimental foundation for building cross-media communication links.