Extraction of Coastal Levees Using U-Net Model with Visible and Topographic Images Observed by High-Resolution Satellite Sensors.

Abstract

Coastal levees play a role in protecting coastal areas from storm surges and high waves, and they provide important input information for inundation damage simulations. However, coastal levee data with uniformity and sufficient accuracy for inundation simulations are not always well developed. Against this background, this study proposed a method to extract coastal levees by inputting high spatial resolution optical satellite image products (RGB images, digital surface models (DSMs), and slope images that can be generated from DSM images), which have high data availability at the locations and times required for simulation, into a deep learning model. The model is based on U-Net, and post-processing for noise removal was introduced to further improve its accuracy. We also proposed a method to calculate levee height using a local maximum filter by giving DSM values to the extracted levee pixels. The validation was conducted in the coastal area of Ibaraki Prefecture in Japan as a test area. The levee mask images for training were manually created by combining these data with satellite images and Google Street View, because the levee GIS data created by the Ibaraki Prefectural Government were incomplete in some parts. First, the deep learning models were compared and evaluated, and it was shown that U-Net was more accurate than Pix2Pix and BBS-Net in identifying levees. Next, three cases of input images were evaluated: (Case 1) RGB image only, (Case 2) RGB and DSM images, and (Case 3) RGB, DSM, and slope images. Case 3 was found to be the most accurate, with an average Matthews correlation coefficient of 0.674. The effectiveness of noise removal post-processing was also demonstrated. In addition, an example of the calculation of levee heights was presented and evaluated for validity. In conclusion, this method was shown to be effective in extracting coastal levees. The evaluation of generalizability and use in actual inundation simulations are future tasks.