Abstract
A solvent extraction study has been carried out to extract and separate zirconium and hafnium from nitrate medium by using some phosphine oxide extractants (CYANEX 921, CYANEX 923, and CYANEX 925) in kerosene. The influence of the different factors affecting the extraction process was studied in detail. Apparently the rate of extraction of Zr(IV) and Hf(IV) in CYANEX 921, CYANEX 923, and CYANEX 925 is reasonably fast. The extraction increases with increasing temperature, suggesting that the reaction is endothermic. The stripping percent of Zr(IV) and Hf(IV) by 0.5 M HNO3 from the loaded organic phase after two stages reached 97.5% and 10.2%, respectively, which lead to good separation of the two metals. Under the optimum conditions, the extraction of zirconium was about 90, 87.6, and 91.6% and separation factors equal to 17, 21.4, and 40.7 were obtained for CYANEX 921, CYANEX 923, and CYANEX 925, respectively. The results obtained reveal that 2.0 M nitric acid is the optimum acid concentration for the separation of Zr(IV) and Hf(IV) and 0.4 M CYANEX 925 performs more efficient separation compared with other organophosphorus extractants.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
