Abstract
A solid-phase extraction cartridge was fabricated using diallyl isophthalate as the monomer with the addition of porous organic cage material via in situ free-radical polymerization in a stainless-steel column. The resulting monolithic adsorbent exhibited a relatively uniform porous structure, a high specific surface area of 113.98 m2 /g, and multiple functional chemical groups according to the characterization results. An online solid-phase extraction-high-performance liquid chromatography procedure was fabricated to extract and determine tussilagone from Farfarae Flos. The results show that the complex sample matrices can be removed in the solid-phase extraction procedure. Simultaneously, tussilagone can remain, which can be subsequently switched to an octadecylsilane bondedanalytical column. The methodological validation showed that the correlation coefficient was 0.9999 with a linear range of 0.6-200.0µg/mL, the limit of detection was 0.2µg/mL, the limit of quantification was 0.6µg/mL, accuracy was 100.3-100.6%, and relative standard deviation of precision was ≤1.9%. The present monolithic cartridge exhibits good reusability of not more than 100 times. The real sample of Farfarae Flos was determined with a tussilagone content of 0.74mg/g.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
