Extension of x-ray lithography to 50 nm with a harder spectrum

Abstract

To be competitive with the next-generation lithography technologies, synchrotron-based proximity x-ray lithography (PXRL) must prove to be extendible to produce minimum feature sizes of 70 nm and below. We present here a relatively simple and practical method to improve the PXRL system performance for the replication of features down to 50 nm with reasonable process latitude at large (g≈15μ) mask–wafer gaps. Contrary to previous conclusions indicating λ=1 nm as the best operating region, we find that a significant improvement can be achieved by a modest decrease in the effective wavelength of present PXRL systems, and by the use of non-silicon-based materials in beamline filters and masks. The proposed PXRL system requires a synchrotron storage ring with slightly higher energy than older rings such as Aladdin, but well within the design parameters of the newer generation of synchrotrons, and some beamline modifications. In addition, a diamond mask substrate is also utilized to eliminate the x-ray absorption due to the Si-absorption edge at 1.75 keV.