Extending the Life Cycle of Cement Binders by Partially Replacing Portland Cement with Different Types Fluidized Bed Combustion Fly Ash

Abstract

A significant reduction in the CO2 emission associated with cement production is obtained by partially replacing Portland cement with supplementary cementing materials (SCM’s): e.g., siliceous fly ash or granulated blast furnace slag. In the near future, the limited availability of these materials will do more attractive to use ashes from combustion in fluidized bed boilers, which currently are mainly deposited in various landfills. Paper identifies the effect of Fluidized Bed Combustion (FBC) fly ash from both hard and brown coal combustion on the durability of mortars exposed to sodium and magnesium sulfate solution at different curing temperature: 20 and 5 °C. The evaluation was based on the results of long-term linear changes of mortar samples made with Portland cement and different amounts of FBC fly ash addition stored in a corrosive environment, as well as the evaluation of the type of formed corrosion products using XRD and microstructural studies (SEM/EDS). It has been shown that amount of FBC fly ashes used in binders significantly determines sulfate resistance of prepared cements as well as its chemical composition. By using fluidized ashes, the sulfate resistance of cement binders can be achieved with their content even of 15%.