Abstract
AbstractExtending the spin‐dephasing time (T2*) of perfectly aligned nitrogen‐vacancy (NV) centers in large‐volume chemical vapor deposition (CVD) diamonds leads to enhanced DC magnetic sensitivity. However, T2* of the NV centers is significantly reduced by the stress distribution in the diamond film as its thickness increases. To overcome this issue, they developed a method to mitigate the stress distribution in the CVD diamond films, leading to a T2* extension of the ensemble NV centers. CVD diamond films of ≈60 µm thickness with perfectly aligned NV centers are formed on (111) diamond substrates with misorientation angles of 2.0°, 3.7°, 5.0°, and 10.0°. The study found that T2* of the ensemble of NV centers increased to approach its value limited only by the electron and nuclear spin bath with increasing the misorientation angle. Microscopic stress imaging revealed that the stress distribution is highly inhomogeneous along the depth direction in the CVD diamond film at low misorientation angles, whereas the inhomogeneity is largely suppressed on highly misoriented substrates. The reduced stress distribution possibly originates from the reduction of the dislocation density in the CVD diamond. This study provides an important method for synthesizing high‐quality diamond materials for use in highly sensitive quantum sensors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.