Exposure estimates for repair satellites at geosynchronous orbit

Abstract

Communications and weather satellites in geosynchronous (GEO, altitude: 35,793km.) and geostationary orbits (GSO) are revolutionizing our ability to almost instantly communicate with each other, capture high resolution global imagery for weather forecasting and obtain a multitude of other geophysical data for environmental protection purposes. The rapid increase in the number of satellites at GEO is partly due to the exponential expansion of the internet, its commercial potential and the need to deliver a large amount of digital information in near real time. With the large number of satellites operating at GEO and particularly at GSO, there is a need to think of viable approaches to retrieve, rejuvenate and perhaps repair these satellites. The first step in this process is a detailed understanding of the ionizing radiation environment at GEO. Currently, the most widely used trapped particle radiation environment definition near Earth is based on the NASA’s static AP8/AE8 models which define the trapped proton and electron intensities. These models are based on a large number of satellite measurements carried out in the 1960s and 1970s. In this paper, the AP8/AE8 models as well as a heavy ion galactic cosmic ray (GCR) model are used to define the radiation environments for protons, electrons and heavy ions at low Earth orbit (LEO), medium Earth orbit (MEO) and GEO. LEO and MEO dosimetric calculations are included in the analysis since any launch platform capable of delivering a payload to GEO will accumulate exposure during its transit through LEO and MEO. The computational approach (particle transport) taken in this paper is to use the static LEO, MEO, GEO and geomagnetically attenuated GCR environments as input to the NASA Langley Research Center (LaRC) developed deterministic particle transport codes high charge and energy transport (HZETRN) and coupled electron photon transport (CEPTRN). This is done through exposure prediction within a spherical shell, a legacy Apollo era command service module (CSM) configuration, and a large modular structure represented by a specific configuration of the international Space Station (ISS-11A, circa 2005). Based on the results of the simulations, conclusions are drawn on the exposure levels accumulated by these geometries throughout a mission to GEO.