Exposure Assessment of Array Antennas at 28 GHz Using Hybrid Spherical Near-Field Transformation and FDTD Method

Abstract

To protect humans from overexposure to electromagnetic (EM) fields above 6 GHz, recently revised International Commission on Non-Ionizing Radiation Protection guidelines and IEEE standard specify the basic restrictions in terms of absorbed power density (APD) and epithelial power density, respectively. To assess the EM exposure resulting from the 5G mmWave array antenna, we adopted a hybrid method that combines spherical near-field measurements and numerical dosimetry with spherical near-field transformation. Four array antennas working at 28 GHz were used as the radiation sources. The incident power density (IPD), APD, and temperature rise in a stratified body model and anatomical partial body models corresponding to different body locations were evaluated for various antenna-body distances. The results were validated by comparison with the full-wave simulations. The differences in peak spatial-average IPD and APD between two methods are below 0.08 and 1.05 dB, respectively, for the simulated cases and generally decrease with the increasing antenna-body distance. The highest heating factor for the peak spatial-average APD was approximately 0.025°C/(W/m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> ). The results also show that the differences in APD and temperature rise caused by various exposed body locations are marginal.