Abstract
This paper introduces a method for attenuating longitudinal elastic waves in metamaterial bars through the utilization of Dual-Action (DA) vibration absorbers equipped with multifrequency resonators (MFRs). The metamaterial bar (Metabar) is composed of a linear arrangement of evenly distributed and enclosed DA vibration absorbers connected to an isotropic bar. The DA vibration absorber is constructed with multiple spring-mass resonators interconnected with each segment of the isotropic bar at two points. An analytical methodology is formulated employing Finite Element Modeling (FEM) and Bloch’s theorem to demonstrate the existence of multiple stopbands, leading to the generation of broad and configurable frequency stopbands. The article illustrates the design and modeling of the metabar’s DA vibration absorber, showcasing analytically that the vibration suppression and, consequently, wave attenuation within the metamaterial bar are grounded in the fundamental principles of basic mechanical vibration absorption. The DA absorber effectively prevents longitudinal wave propagation through the metabar by generating two internal forces to counteract any incoming wave within the stopband frequencies. Furthermore, these internal forces can be adjusted by optimizing the effective properties of the DA vibration absorber. A comprehensive parametric investigation is then conducted to analyze how the properties of the enclosed MFRs of the DA absorber, such as mass densities and stiffness coefficients, influence the locations and sizes of the frequency stopbands. The results from FEM simulations show a substantial alignment with dispersion curves across various prescribed configurations, offering strong validation for the proposed metamaterial design that integrates the DA vibration absorber with MFRs. The introduced mechanism for vibration absorption and suppression is of significance in applications involving the control and manipulation of wave propagation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have