Exploring the pyro-phototronic effect for giant lateral photoresponse in an ITO/CdS/Si heterojunction position-sensitive detector

Abstract

The demand for a high-performance position sensitive detector (PSD), a novel type of photoelectric sensor, is increasing due to advancements in digitization and automation technology. Cadmium sulfide (CdS), a non-centrosymmetric material, holds significant potential in photoelectric devices. However, the pyroelectric effect of CdS in PSDs and its influence on lateral photoresponse are still unknown. In this work, we fabricated an ITO/CdS/Si heterojunction using chemical bath deposition (CBD) and investigated the pyro-phototronic effect under nonuniform illumination. The theory of electron-hole pairs’ generation, separation, and carrier diffusion was carefully considered to understand the underlying mechanisms. Our experimental findings revealed that the device exhibited an exceptionally high position sensitivity (PS) of 1061.3 mV/mm, surpassing the generally observed PS of 655.1 mV/mm induced by single photovoltaic effect by 160.5%. Meanwhile, the PSD demonstrated rapid response times of 0.01 and 0.04 ms, respectively. Moreover, the influence of ambient temperature and electrode distance on the pyro-phototronic effect was well analyzed. Notably, the PSD exhibited remarkable stability even at ambient temperatures up to 150 °C. Despite the considerable working distance of 11 mm, the PS of the PSD remained at 128.99 mV/mm. These findings provide valuable theoretical and experimental foundations for optimizing the design and implementation of high-performance large working distance PSDs.