Abstract
The performance enhancement of functionally graded thermoelectric (FGTE) devices is significantly influenced by contact studies of the FGTE materials. It is unclear how the finite thickness and the punch geometry influence the FGTE materials’ contact behaviors. This paper investigates the frictionless contact problem between three types of rigid punches (flat, triangular, and cylindrical) and the FGTE strip with finite thickness. The electric-thermo-elastic parameters of the FGTE strip vary in the thickness direction according to an exponential function. Based on the Fourier integral transform and the transformation matrix method, the problem is transformed into the numerical solution of three sets of singular integral equations. The presence of singular features on either side of the punch demands the adoption of specific collocation strategies. The distribution of the normal current density, the normal energy flux, and the normal contact stress is obtained by adjusting multiple electric-thermo-elastic parameters. The contact stresses in the case of punches with varying shapes can be effectively controlled by modulating the coefficient of thermal expansion and the strip thickness, whereas the effect of the electrical conductivity, the shear modulus, and the thermoelectric load on these stresses depends on whether they are increased or decreased
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.