Exploring Microstructural, Interfacial, Mechanical, and Wear Properties of AlSi7Mg0.3 Composites with TiMOVWCr High-Entropy Alloy Powder.

Abstract

This study explored the impact of varying weight percentages of TiMoVWCr high-entropy alloy (HEA) powder addition on A356 composites produced using friction stir processing (FSP). Unlike previous research that often focused on singular aspects, such as mechanical properties, or microstructural analysis, this investigation systematically examined the multifaceted performance of A356 composites by comprehensively assessing the microstructure, interfacial bonding strength, mechanical properties, and wear behavior. The study identified a uniform distribution of TiMoVWCr HEA powder in the composition A356/2%Ti2%Mo2%V2%W2%Cr, highlighting the effectiveness of the FSP technique in achieving homogeneous dispersion. Strong bonding between the reinforcement and matrix material was observed in the same composition, indicating favorable interfacial characteristics. Mechanical properties, including tensile strength and hardness, were evaluated for various compositions, demonstrating significant improvements across the board. The addition of 2%Ti2%Mo2%V2%W2%Cr powder enhanced the tensile strength by 36.39%, while hardness improved by 62.71%. Similarly, wear resistance showed notable enhancements ranging from 35.56 to 48.89% for different compositions. Microstructural analysis revealed approximately 1640.59 grains per square inch for the A356/2%Ti2%Mo2%V2%W2%Cr processed composite at 500 magnifications. In reinforcing Al composites with Ti, Mo, V, W, and Cr high-entropy alloy (HEA) particles, each element imparted distinct benefits. Titanium (Ti) enhanced strength and wear resistance, molybdenum (Mo) contributed to improved hardness, vanadium (V) promoted hardenability, tungsten (W) enhanced wear resistance, and chromium (Cr) provided wear resistance and hardness. Anticipating the potential applications of the developed composite, the study suggests its suitability for the aerospace sector, particularly in casting lightweight yet high-strength parts such as aircraft components, engine components, and structural components, underlining the significance of the investigated TiMoVWCr HEA powder-modified A356 composites.