Exploring carbon dioxide sequestration in desalination reject brine via NaOH reaction: A kinetics study

Abstract

Seawater desalination is one of the most sustainable means of water supply in arid and semi-arid regions. Despite its undeniable potential to meet the global water demands, there are several environmental impacts associated with its operation, including the generation of reject brine and the emission of considerable amounts of CO2. Recently, the mineralization of carbon dioxide using desalination reject brine has emerged as a potential solution for simultaneous brine management and CO2 sequestration. In this study, the reaction kinetics of desalination reject brine with CO2 in the presence of NaOH are evaluated. The effect of various operating parameters, such as the temperature, CO2 concentration, NaOH dosage, brine salinity, CO2 flowrates and inert particles volume percent were investigated by varying them within the range of 15–55 °C, 3–20 %, 6–16 g/L, 5–72 g/L, 1–5 L/min and 0–20 %, respectively. The experimental data showed that the overall rate of CO2 conversion is equal to the sum of the rates observed for Ca2+ and Mg2+ carbonation reactions and increases proportionally with the increase in CO2 concentration. The addition of NaOH improved the Ca2+ carbonation reaction rate but had no effect on Mg2+ carbonation reactions within the investigated reaction conditions. Interestingly, increasing brine salinity had a negative effect on the reaction rate, while the change in temperature and inert particles had minimal effect on the overall reaction rate. Analysis of the solid products showed that Hydromagnesite and Calcite were the two major products obtained. Finally, experimental data were used to develop a rate model representing the CO2-Brine-NaOH system. The developed model will assist in successfully predicting the performance of the process and pave the way for efficient brine management and CO2 sequestration.