Abstract

There has been an intense surge in interest in the search for alternative sources of petroleum fuels in the modern world as a result of the inflation of fuel prices and the historic supply gap. When compared to petroleum fuels, biodiesel is becoming an increasingly valuable option due to the fact that it produces less emissions and provides the almost same amount of energy. In point of fact, the prime aim of this work is to explore the possibility of utilizing biodiesel derived from lemongrass oil and including dibutyl ether as an additive for the test diesel engine operating on varied compression ratios. The findings showed that the best operating settings are a 17.5 compression ratio with a blend of 30% biodiesel and 70% diesel fuel. At greater loads, brake thermal efficiency is lower than that of diesel engines. Lower loads result in lower specific fuel usage. Mechanical efficiency at higher loads is highest in the B30 blend, but emission metrics such as CO, CO2, HC, and NOx were reduced with the inclusion of an additive, though HC rose with higher loads of lemongrass oil biodiesel blends. When compared to the B30 biodiesel blend with various composition additives, the B30 + 4% additive has the highest efficiency at the fourth load in terms of both brake power and mechanical efficiency.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.