Abstract

This paper conducts impact dynamics experiments on coal measures sandstone in a deep mine via the established dynamic load and temperature split Hopkinson pressure bar (SHPB) experimental system. Firstly, the experimental conditions for the impact dynamics of fine sandstone were determined, with temperatures of 18, 40, 60, 80, and 100 °C, an axial static load range of 1–9 MPa, and a preset bullet incidence velocity of 1.0–5.0 m/s. Secondly, based on the analysis of the basic parameters and physical composition, the dynamic stress and strain responses of fine sandstone under different experimental conditions were obtained, and the change mechanism of its dynamic mechanical process was theoretically analyzed. When the temperature rose from 18 °C to 100 °C, the dynamic peak stress of fine sandstone increased from 36.04 MPa to 73.41 MPa, with an increase of 103.7%. At a temperature of 40 °C, when the axial static load increased from 1 MPa to 9 MPa, the dynamic stress peak of fine sandstone increased from 57.25 MPa to 80.01 MPa, and the corresponding peak strain also showed an increasing trend. The experiment analyzed the variation characteristics of dynamic stress in fine sandstone under the combined action of different strain rates or bullet incidence velocities and different temperatures. In the strain rate range of 47.1 s−1 to 140.9 s−1, there was a significant strain rate effect on the dynamic peak stress and peak strain of fine sandstone, which increased with the increase of strain rate. The study found a polynomial relationship between the dynamic mechanical parameters of fine sandstone and the impact of experimental parameters, with a coefficient of determination greater than 0.9. A dynamic stress constitutive model for fine sandstone under one-dimensional stress state under dynamic load and temperature action was established, and the model validation and parameter determination of dynamic stress changes in fine sandstone under different temperature conditions were carried out. The research results provide a new experimental method for the static and dynamic mechanical analysis of coal and rock masses under complex geological conditions and can provide a basic reference for the prevention and control of dynamic disasters in deep mining processes.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call