Experiments on effects of dust particles on the wear of cylinder liner in internal combustion engine

Abstract

Purpose – The purpose of this paper is to study the effect of particles on the wear of cylinder liner in internal combustion (IC) engine under some typical weather conditions.Design/methodology/approach – Experiments were conducted under some typical dust weather which was simulated by the self‐built test‐bed with an actual diesel engine. Three‐dimensional surface morphology was applied to produce a comprehensive characterization of cylinder liner's wear. Ferrography and oil spectrum analysis were employed for further understanding of the abrasion of the cylinder liner caused by particles.Findings – The presence of particles destroyed the lubricating condition of piston‐cylinder liner, speeded up the wear of liner, especially on the thrust side, and aggravated the local wear. Wear curves showed that greater wear volume occurred near bottom dead center on the thrust side under the dust condition. However, on the anti‐thrust side, wear volume of top dead center was greater than that of bottom dead center, s...