Abstract

The deposition behavior of fine sediment is an important phenomenon, and yet it is unclear to engineers concerned about reservoir sedimentation. Laboratory experiments were conducted to produce both quasi-homogeneous flow and a turbidity current region divided by a plunge section. Silica powder (a noncohesive sediment) and kaolin (a cohesive sediment) were used as the suspended material. Because the effective gravitational force is the primary driving force for velocity in turbidity currents, the velocity profile was closely related to the concentration profile. The deposition rate of noncohesive coarser particles exponentially decays along the flow path. Most of the coarser particles were deposited in the quasi-homogeneous flow region or within a small distance downstream of the plunge section. The plunge did not carry those coarser particles further downstream. Deposition in the region of the turbidity current was found mainly by cohesive particles. Hydraulic sorting exists in the quasi-homogeneous flow...

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.