Experimentally determining the thermophysical properties, heat transfer and friction factor Fe3O4-TiO2 magnetic hybrid nanofluids in a mini-heat sink under magnetic field: Proposing new correlations

Abstract

The heat transfer and friction factor for the Fe3O4-TiO2/water nanofluids circulating in a mini-heat sink of comparable magnitude to personal computer or electronic gadgets with and without a magnetic field have been estimated experimentally. The Fe3O4-TiO2 nanomaterial was prepared using chemical coprecipitation and sol–gel technique. Synthesized Fe3O4-TiO2 nanoparticles were characterized by X-ray diffraction, and vibrating sample magnetometer. The water-based hybrid nanofluids were then used in a series of experiments for assessing heat transfer, and friction factor of a mini-heat sink assembly of five circular channels with 4 mm in diameter and 50 mm in length. The experiments were performed in the operating range: 238.66 < Re < 1873.36; 0 <ϕ < 2 %; and 0 < Gauss < 1000, respectively. Constant heat flux boundary condition was maintained at the bottom surface of the heat sink and an external magnetic field was provided with an electromagnet. Results indicate that, by using the Fe3O4-TiO2 hybrid nanofluid of 2 % vol. the Nusselt number, with no magnetic field, is enhanced over that of water by 38.16 %, and by 88.93 % when the magnetic field of 1000 gauss is applied. However, the hybrid nanofluid of 2 vol% imposed a penalty in increase in friction factor of 25.87 % without magnetic field, and 67.64 % when magnetic field of 1000 G is applied at a Reynolds number of 1873.33 over water data. The experimental data were used to develop generalized Nusselt number and friction factor correlations for a mini-heat sink subjected to an external magnetic field.