Abstract
The accuracy of a phase-retrieval procedure for microwave beams was analyzed and verified using an 84-GHz quasi-optical beam transmitted by a corrugated waveguide. The output intensity and phase profiles of the beam were directly measured with a microwave receiver. The beam intensity was also measured at several planes and the data were used with a phase-retrieval algorithm to yield an independent estimate of the phase. Moment and matching coefficient methods were used to analyze the retrieved profiles. In the higher order moment analysis, the intensity profiles, which were calculated from the retrieved phase profiles, coincided well with the measured profiles in terms of the beam size, asymmetric property (skewness), and flatness/peakedness (kurtosis) over the entire profile. Analysis indicated that the mode content of the beam obtained by phase retrieval matched that of the direct measurement with a matching coefficient of 0.97 using both the intensity and phase profiles
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
