Experimental Verification of Modified Lee’s Model Using a Newly Designed and Constructed Filippov-Type Plasma Focus Device

Abstract

A new 20 kJ Filippov-type plasma focus device has been designed and constructed in Isfahan University. The paper reports on the design and construction of the Iranian Filippov-type plasma focus device (UIPFF1) using modified Lee’s model. A Rogowski coil has been used to measure the experimental discharge current. Equivalent electric circuit of the device is RLC circuit; therefore the discharge current has a sinusoidal shape which its amplitude decreases exponentially during the time. The current signal contains a set of data from physical processes in the device as well as discharge current characteristics. In a typical discharge experiment these values were obtained: the discharge current was 181 kA, period of current signal 7.9 µs, the total inductance of the device 132 nH and electrical resistance of the circuit 77 mΩ. By averaging from data obtained with a set of five experiments the calibration factor was obtained 121 kA/V. Temporal changes in plasma focus discharge current, confirmed the occurrence of pinch at a specific pressure of argon, neon and nitrogen gases. UIPFF1 has been tested between 15 and 25 kV and wide range of pressure for various gases. Experiments at various pressures and voltages have also confirmed reproducibility and stability of the plasma focus device.