Abstract

The removal of hexavalent chromium [Cr (VI)] using non-living cells of Yarrowia lipolytica was investigated. Batch and continuous studies on removal of Cr (VI) achieved 97% and 99% removal from aqueous phase, respectively. The specific uptake values at pH of 2 in batch process were 40.73 ± 1.3 mg/g and 30.09 ± 0.23 mg/g on non-living cells, when 100 and 200 mg/L of metal Cr (VI) concentrations were used. In order to investigate the regulation of Cr (VI) under continuous operation based on reaction volume numerically a new class of feedback controller from structure polynomial was designed. The proposed methodology was used to an experimentally kinetic model for a removal Cr (VI) from Yarrowia lipolytica biomass was showed satisfactory closed-loop performance the proposed controller. Starting from an off-line optimization performed in simulation, we present the controller implementation, focussing on the methodology required to could be suitable for implementation in real time. In our experimental results, we highlight some discrepancies between simulation and reality despite these differences, the controller managed to perform convergence to removal Cr (VI). Finally, the results validated with off-line samples suggest that the proposed control could be suitable for in application in potential scenarios for wastewater treatment.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.