Abstract
Blade Tip Timing (BTT) technology is concerned with the estimation of turbomachinery blade stresses. The stresses are determined from BTT data by relating the measured tip deflection to the stresses via Finite Element (FE) models. The correlation of BTT measurements with FE predictions involves a number of uncertainties. This paper presents the process for validating the FE stress and deflection predictions of aero-engine compressor blades under non-rotation conditions as a critical preliminary step towards the complete understanding of their dynamic behaviour under rotating conditions when using BTT measurements. The process steps are described in detail, including the FE modelling and analysis of the blades and the blade-disk assembly, and the measurements of the blade tip deflection and blade stress. Furthermore, the uncertainties associated with the FE modelling and the measurement processes are quantified. The results show that the FE model is valid considering the control of most uncertainties. The experimental validation of the FE-computed stress-to-tip deflection calibration factors in the present study provides the basis for the determination of the calibration factors under rotational conditions using a previously presented BTT data simulator, and for the design of corresponding rotating experiments using BTT.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
