Abstract
This paper presents a bidirectional multilevel dc–dc power converter for electric vehicle (EV) battery charging. The operating principle of the power converter was presented, analyzed, and experimentally validated under normal and fault conditions. The topology under study was integrated into a bipolar dc grid through the split dc-link of the bidirectional multilevel dc–dc power converter. Considering the failures that can occur in the bipolar dc grid, i.e., in each wire of the bipolar dc grid (positive, negative, and neutral), it was experimentally verified that the dc–dc power converter ensures that the EV battery-charging process continues, regardless of the occurrence or absence of open-circuit failures. In light of this fact, the proposed control algorithms and the presented topology were validated through a set of considerable simulation and experimental results, analyzing the distinct states of the power semiconductors, which compose the bidirectional multilevel dc–dc power converter, for distinct conditions of operation. The developed laboratory prototype of the bidirectional multilevel dc–dc power converter for EV battery charging, which was implemented to obtain the experimental results, is described in detail in this paper. The experimental validation was carried out for the main different fault conditions in the bipolar dc grid in terms of open-circuit failures and, moreover, considering the steady-state and transient-state operations of the dc–dc power converter. The experimental analysis demonstrated that even in the presence of failures in the positive, negative, or neutral wires of the bipolar dc grid, the bidirectional multilevel dc–dc power converter guarantees the correct EV battery-charging operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have