Year-end Sale % OFF 
Abstract
AbstractThis paper presents results of an analytical and experimental investigation on RC T-beams retrofitted in shear with embedded through-section (ETS) fiber-reinforced polymer (FRP). The ETS FRP rod method is a promising method to increase the shear strength of RC beams. As this method develops, the structural behavior of RC beams strengthened with the ETS method needs to be thoroughly characterized and the influencing parameters addressed. In this research study, nine tests were performed on 4,520-mm-long RC T-beams. The parameters of this study are (1) the effect of the surface coating on the FRP bars, (2) the effect of internal transverse steel reinforcement on the FRP shear contribution, (3) the effect of FRP bar spacing, (4) the effect of FRP rod diameter, and (5) the efficiency of the embedded through-section FRP rod method. The main objective of the study is to analyze the behavior of RC T-beams strengthened in shear with ETS FRP rods by varying the parameters just mentioned. New design equatio...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
