Abstract
Lamellar tearing and crack-induced brittle failures along steel plates in the through-thickness direction seriously threaten the safety and reliability of steel thick plate structures in construction and service, especially at low ambient temperatures. Three kinds of tests, including uniaxial tensile tests, Charpy V-Notch impact tests, and three-point bending (TPB) tests were performed at normal and low temperatures to investigate the through-thickness mechanical properties, impact and fracture toughness of Q345B structural steel plates with thicknesses from 60 to 165 mm. The test specimens were mainly sampled along the through-thickness direction of the plate, but transverse specimens along the rolling direction were also involved. The ductility index (percentage reduction of area), impact toughness index (Charpy impact energy), and fracture toughness index (critical crack tip opening displacement (CTOD) values) all decrease as the temperature declines. All the mechanical properties and the impact and fracture toughness along the through-thickness direction are worse than those along the rolling direction. The results also offer experimental support for the determination of an evaluation indicator for structural steel thick plates with through-thickness characteristics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
