Experimental study on the properties of modern blue clay brick for Kaifeng People's Conference Hall

Abstract

This article presents building assessment research comprising on-site inspections, indoor scientific tests, and material performance studies on the wall blue clay bricks in the Kaifeng People’s Conference Hall, objectively developing an enhanced scientific understanding to renovate modern buildings. Using X-ray diffraction (XRD), scanning electron microscopy (SEM), alongside a parametric study of density, moisture content, water absorption, void ratio, frosting, compressive strength, and softening coefficient in assessing the material health of the blue clay bricks and it’s non-key parts, in developing “appropriate and compatible renovation” to repair contemporaneous buildings. The composition, pore characteristics, weathering degree, and mechanical properties of the blue clay brick samples were analyzed. These parameters showed that blue clay brick fired at less than 1000 °C; the main mineral composition as quartz, followed by albite, mica, and anorthite. Its density was 1.573 g/cm3, less than the 1.70 g/cm3 of ordinary clay brick. According to the standards, the water absorption was greater than that of regular sintered bricks by more than 18% and was slightly frosted. Compressive strength being less than MU10 did not meet the current design specifications for masonry. Its softening coefficient was between 0.70 and 0.85, but its water resistance was relatively good. The research results provide an essential reference for judging the health and longevity of modern buildings to achieve scientific guidelines for practical protection.