Experimental Study on the Permeability of Microbial-Solidified Calcareous Sand Based on MICP

Abstract

In the construction of artificial islands in distant seas, calcareous sand has been widely used as a foundation filler due to its excellent mechanical properties and extensive availability in the marine environment. How to store more fresh water on the artificial islands by reducing its permeability is currently a great challenge. Microbial-induced carbonate precipitation (MICP) has always been considered as a great potential method to improve the cemented properties of calcareous sand, but the effect of grain gradation on the permeability of MICP-improved calcareous sand remains unclear. In this research, a self-made device was developed to conduct MICP grouting and permeability tests, where the permeability coefficient (k) under different grain gradations (curvature coefficient (Cc) and uniformity coefficient (Cu)) was measured. A CT scan was conducted to investigate the variation in the porosity (n) of sand samples before and after MICP treatment. The weighting method was adopted to measure the content of induced calcium carbonate (M). A scanning electron microscopy (SEM) technique was used to further study the micromechanism of the MICP treatment. Finally, the correlations between the k of MICP-treated sand and Cu, as well as Cc, were semiquantitively analyzed. The results show that the magnitude of M, k and n changes are closely related to Cc and Cu. The reduction amount of k and n increased with the rise in Cc and Cu, and the increased amount of M increased with the rise in Cc and Cu. The SEM results show that the particle surface became rough due to the coating effect of CaCO3 crystals, and the pore spaces were reduced because of the partially filling effect of the crystals, which was responsible for the decrease in permeability and porosity. Furthermore, k fitted well with Cu and Cc, respectively, and the fitting curve reveals that larger Cu (Cu ≥ 6.0) and smaller Cc (2.0 > Cc > 0.5) were more suitable for MICP treatments and lead to a large reduction in permeability. The above results indicate that the grain gradation of calcareous sand had a significant influence on its permeability improved by MICP.