Experimental study on the influence of the wall cavity on stability of kerosene two-phase rotating detonation combustion

Abstract

The combustion characteristics in annular rotating detonation combustors are experimentally investigated using 40% oxygen-enriched air and liquid aviation kerosene (RP-3) as reactants. Two types of wall cavity structures, embedded in the outer and the inner wall of the annular combustors, respectively, are employed to study their effects on detonation stability. The characteristics of typical combustion modes observed in the annular combustors are firstly analyzed. The regime of typical combustion modes is then examined in the phase diagram of mass flow rate and equivalence ratio. Results show that the single-wave mode regime can be affected by wall cavities. In comparison to the combustor without a wall cavity, the regime is expanded for the cavity in the inner wall but significantly reduced for the cavity in the outer wall. When the single-wave mode forms, the cavities embedded in the inner wall result in a significant increase of the apparent detonation wave velocity but a decrease in the velocity fluctuation rate, and the effects are changed with the axial location of the cavities. The axial location of the cavity can also influence the stable propagation location of the detonation wave. Additionally, the analysis of the high-frequency pressure signals indicates that the cavities do not affect the initiation process of the formation of the combustion modes. However, the variation of oxidizer mass flow rate and equivalence ratio can evidently influence the evolution time of different combustion modes after ignition. The study indicates that the wall cavity structure has a significant influence on the propagation behavior of rotating detonation waves in the combustors, and it can be utilized to enhance the stability of kerosene two-phase rotating detonation combustion.