Abstract
ABSTRACT In order to study the influence of associated pyrite interlayer content in coal seam on coal spontaneous combustion, the infrared spectrum of anthracite in Shanxi Yangquan mining area with different content of pyrite was tested by Fourier infrared spectrometer, and the variation law of the influence of the content of associated pyrite on coal surface functional groups was studied. In this paper, the TG, DTG, DSC curves and heat release curves of associated pyrite coal samples during programmed temperature rise were studied by synchronous thermal analyzer experiment. The results show that such features can be found in the spectrum of six coal samples that the aliphatic hydrocarbon content is always higher than that of the AP-0 coal sample. When associated pyrite content is 60%, the content of aromatic hydrocarbons in the AP-0 coal sample is the smallest, and the change of hydroxyl content is the largest. The more vigorous the coal surface functional groups are, the slower the oxidation reaction with oxygen occurs. The higher the content of pyrite associated with the formation of this coal sample, the smaller the relevant weight change during the oxidation reaction. The lower the ignition temperature of coal sample is, the more hematite (Fe2O3) is left in the coal residue, and the lower the maximum heat flow rate, the lower the heat release.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Coal Preparation and Utilization
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.