Experimental study on the fire resistance of all-composite and hybrid web-core sandwich panels for building floors

Abstract

Fibre-reinforced polymer (FRP) composites and polymeric foams used in construction are susceptible to elevated temperatures, but little is known about the behaviour of composite sandwich panels under fire exposure. This paper presents an experimental study on the fire resistance of web-core composite sandwich panels with polyurethane foam infill for building floors. Two panel variants were considered: (i) an all-composite panel, with glass-FRP (GFRP) face sheets and webs; and (ii) a hybrid panel, with an additional fibre reinforced concrete (FRC) top layer. Five full-scale specimens were loaded in a four-point bending configuration, subjected to a constant service load, and subsequently exposed to a standard fire (ISO 834) on their bottom face. The effectiveness of passive fire protection systems, consisting of calcium silicate boards installed either adherent to the panels or forming an air cavity, was assessed. The following features were investigated: (i)temperature progression across the thickness of the panels, (ii)their mechanical response, (iii)failure modes, and (iv)fire resistance. The results obtained indicate that despite the vulnerability of composite sandwich panels to fire, relatively high fire resistances of 44 min and 49 min were obtained for the unprotected web-core all-composite and hybrid variants, respectively. The failure mechanism of the sandwich panels generally involved local compression and in-plane shear failure of the webs. The use of suitable passive fire protections provided significant fire resistance increases of at least 45 min (adherent) and 60 min (with air cavity), allowing to exceed the 90 min threshold.