Abstract
Herein, a series of Co-Fe mixed oxide modified ZSM-5 adsorbents were synthesized using the ultrasonic-assisted impregnation method for the capture of elemental mercury. In comparison with other samples, Co4Fe1-ZSM-5 produced a relatively better performance, with the removal efficiency of around 96.6% Hg0 and the adsorption capacity of around 901.63 ug/mg Hg0 achieved at 120 °C. The interaction between CoOx and FeOx improved the reducibility of oxygen species, thus promoting the oxidation of Hg0. Among a variety of other gas components, O2 and NO exerted a positive effect on Hg0, which improved its removal to a certain extent. By contrast, SO2 caused an adverse effect on the capture of Hg0, which could be reversed to some degree by the introduction of 5% O2. After five cycles, the mercury removal efficiency of Co4Fe1-ZSM-5 remained above 90%, suggesting excellent recyclability. Finally, XPS analysis was conducted to reveal that Mars–Maessen mechanisms are dominant in the process of mercury adsorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.