Abstract
Aimed at the characteristics of high porosity and high permeability reservoir, used the indoor physical simulation method, the experiment of polymer flooding with different polymer concentration and slug size were carried out after water flooding. The effects of polymer concentration and slug size on oil displacement were analysed. The results showed that the optimum polymer concentration was 2200ppm and the optimum polymer slug size was 0.9PV. And polymer concentration and slug size are the decisive factors influencing polymer flooding effect. Under the condition of a certain amount of injection, the higher the polymer concentration, the higher the viscosity of the polymer solution, the greater the reduction range of water content, and the higher the recovery rate of polymer flooding. Under the condition of a certain polymer concentration, the larger the size of the polymer solution slug, the greater the reduction of water content, and the higher the recovery rate of polymer slug flooding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
