Experimental study on the effect of initial accumulation pattern on gas explosion and explosion suppression in a real roadway

Abstract

In real roadways, gas is prone to accumulate, which in turn can lead to explosive hazards. The state of gas accumulation has a significant impact on the degree of disaster caused by gas explosive hazards. In this study, gas explosion propagation in complex situations was investigated in the actual roadway. The mechanism of explosion suppression was explored from the perspective of kinetic analysis of chemical reactions. It is found that the peaks of explosion pressure occur in the gas accumulation zone. The length of explosion flame is 3–5 times larger than that of the initial gas accumulation zone. As the initial accumulation volume increases, the flame propagation velocity (FPV), maximum explosion pressure (MEP) and flame zone length all increase. ABC Powder can effectively suppress explosion flames of gas with different gas accumulation patterns. A prediction model of gas explosion wave energy in the roadway is proposed. The explosion wave energy increases with increasing overpressure ratio. The explosion wave energy decays significantly after 80 m because of explosion suppression. The explosion suppression of ABC powder is a synergistic effect of surface cooling, dilution, physical isolation and chemical mechanisms. The free radical ions generated by the pyrolysis of ABC powder destroy the structure of the flame and make the reaction more difficult, which corresponds to an increase in the critical flame temperature and makes the gas phase dilution effect easier to achieve.