Experimental Study on the Dust-Cleaning Performance of New Structure Microporous Membrane Filter Plate

Abstract

On the basis of the existing dust collector structure, this study designed a fan-shaped new structure microporous membrane filter plate (NSMMFP). The pressure distribution law of the NSMMFP can be obtained by measuring the wall surface peak pressure under different injection pressures. The powder attachment experiment was carried out to explore the influence of the dust moisture content on the dust stripping rate (DSR), and a high-speed camera was used to observe the peeling process of the dust. The results show that the peak pressure of each measuring point and the average wall surface peak pressure gradually increase with the injection pressure. The dust stripping quality (DSQ) and rate show an increasing trend as a whole as the injection distance. The DSR of the filter plate shows a downward trend when the dust quality G increases, while DSQ shows the opposite trend. Furthermore, as the dust moisture content increases, the DSQ and DSR gradually decrease. As the dust moisture content increases, the dust attached to the surface of the filter plate is more fragmented and peels from the surface of the filter plate during the dust cleaning process.