Abstract
The scanning laser line source (SLLS) technique is a novel laser-based inspection method for the ultrasonic detection of small surface-breaking defects. The SLLS approach is based on monitoring the change in laser generated ultrasound as a laser line source is scanning over a defect. It has provided enhanced signal-to-noise performance compared to the traditional pitch-catch or pulse-echo ultrasonic methods. In this paper, an experimental method is presented to detect surface acoustic waves (SAW) with polyvinylindene fluoride(PVDF) transducer. The ultrasonic signal is converted into electric signal by piezoelectricity of the PVDF, which is attached to a micro-knife edge clamped on a metal device. The SAW are excited by employing a pulsed Nd:YAG laser on aluminum plate with artificial surface-breaking defects. The laser line source is accurately shifted by the motorized translation stage, while the PVDF is located at a fixed position on the specimen. When the laser line source is scanning over the defect, the ultrasonic signals are monitored, meanwhile the characteristic changes in the amplitude and frequency content are observed. Consequently, the position of the defect can be determined by analyzing the obtained signals. The experimental system with high sensitivity provides a detection method of small surface-breaking defects on metal and gives convincing experimental evidence for the interaction mechanism between the SAW and the surface-breaking defects.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.