Experimental study on swelling characteristics of compacted bentonite

Abstract

Compacted bentonites are attracting greater attention as back-filling (buffer) materials for repositories of high-level nuclear waste. However, since there are few studies about the swelling characteristics of compacted bentonites, it is first necessary to clarify the fundamental swelling characteristics in detail. For this purpose, various laboratory tests on the swelling deformation and swelling pressure of compacted bentonites were performed and the results analyzed. The following conclusions were drawn from the study. (i) The curve of swelling deformation versus time is strongly dependent on the initial dry density, vertical pressure, and initial water content. The maximum swelling deformation, however, is almost independent of initial water content, and the maximum swelling deformation increases in proportion to the initial dry density, (ii) The maximum swelling pressure increases exponentially with increasing initial dry density, whereas the maximum swelling pressure is almost independent of initial water content. (iii) The swelling mechanism of compacted bentonite was considered on the basis of the swelling behavior of swelling clay particles such as montmorillonite. Furthermore, a model of the swelling characteristics and a new parameter (swelling volumetric strain of montmorillonite), which were able to evaluate the swelling characteristics of compacted bentonite, were proposed. Key words : bentonite, laboratory test, nuclear waste disposal, swelling deformation, swelling pressure.