Abstract
Compressed air energy storage has garnered much attention due to its advantages of long lifespan, low cost and little environmental pollution, and pneumatic motor is equally so due to its advantages of low price, easy operation, and wide power range. In this paper, a small power generation energy storage test device based on pneumatic motor and compressed air is built. The effects of regulator valve pressure and electronic load current on temperature difference, pressure difference, expansion ratio, rotating speed, torque, power output of pneumatic motor, and efficiency of generator are studied by experiments. The experimental results show that the temperature difference, pressure difference and expansion ratio of pneumatic motor increase with the increase of regulator valve pressure and electronic load current. The power output of the pneumatic motor and the efficiency of generator increase at first and then decrease with the increase of the electronic load current, while the power of pneumatic motor and the efficiency of generator increase with the increase of regulator valve pressure. The maximum power output of the pneumatic motor is about 290.3 W, and the maximum efficiency of the generator is about 75.1%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.