Abstract
Traditional I-beam sections connected with end plates face challenges related to end bolts and excessive residual deformation. In response to these challenges, this study introduces an innovative concept: two-segment replaceable links with separated splicing plates. Two variations of replaceable links have been designed - one with separated splicing plates featuring standard bolt holes, and another with short slotted bolt holes. Cyclic loading tests has been conducted to study their seismic performance. The test results reveal that the failure modes of the links include flange buckling and tearing at the welds connecting the flange and end plate. The hysteresis curves of the specimens are complete and stable. The average overstrength coefficient of the links is 1.75, meeting the specified limit requirement for an overstrength coefficient greater than 1.5 for the link. The ultimate plastic rotation reaches up to 0.19 rad. Notably, specimens with short slotted bolt holes exhibit a relatively significant energy dissipation ratio due to bolts slip during test and they demonstrate optimal replaceability in terms of minimized replacement time and residual shear rotation. Furthermore, the two-stage design method for high-strength bolts in splicing plate is proposed considering bolts slip.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
