Experimental study on seismic performance of T‐shaped partly precast reinforced concrete shear wall with grouting sleeves

Abstract

SummaryPrefabricated structure has prominent advantages such as easy control of construction quality, saving fabricating time and natural resources, and reducing environmental pollution and construction noise. The mostly used structural system in high‐rise buildings is reinforced concrete shear wall structure, which has high load capacity and lateral stiffness. Focusing on the connection of reinforcements, three T‐shaped partly prefabricated reinforced concrete shear walls and one cast‐in situ specimen in same dimensions as a control group are tested under low‐frequency cyclic loading to analyze their seismic performances in this paper. During the experiment, the axial compression ratio of specimens is fixed at 0.3, 0.4, and 0.5. Through the observation of phenomena and data analysis, hysteretic curve, skeleton curve, stiffness degradation, ductility, and load bearing capacity are compared and analyzed. The results show that partly prefabricated reinforced concrete shear wall has similar load bearing capacity with the cast in situ specimen, and it also has excellent ductility, stiffness, and energy‐dissipating capacity. The experimental results and analysis indicate that partly prefabricated reinforced concrete shear wall has outstanding seismic performances; under effective and reliable design, it can be used in building structures to play the same role as cast in situ components.