Abstract
Composite structures made of concrete-filled steel tubular (CFST) columns and steel beams have gained widespread usage in high-rise and long-span structures, and beam-to-column joints strengthened by an internal diaphragm (ID) are expected to be efficient joint patterns. However, the thickness ratio (ηbc) limit of beam-to-column flanges is not considered sufficiently in current design codes and existing studies. Moreover, the previous tests rarely included specimens with a beam flange thickness reaching 40 mm. Thus, three joint specimens were designed and tested under cyclic loadings to further investigate the mechanical properties of the ID-type joints and guide engineering applications. The effects of the thickness ratio of the beam-to-column flange were mainly considered in this study. All beam flange thicknesses were 40 mm. Two failure modes were observed, including excessive development of beam plasticity and failure of local connections. Specifically, as the thickness of column walls decreased, the seismic behaviour, such as the resistance, stiffness and ductility of the joints, deteriorated obviously. Two out of three joint specimens satisfied the AISC requirements for composite special moment frames (C-SMF). Based on the test results, the limit value of the thickness ratio of beam-to-column flange (ηbc) has been proposed for design purposes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
