Abstract

AbstractThe leakage of molten salt storage tanks in concentrating solar power plants has attracted much attention. This paper focused on seepage and migration characteristics of molten salt in the thermal‐steady foundation fillers with different configurations after leakage occurs through a self‐built experimental system modeling the actual leaking process. The results show that the thermal insulation of light expanded clay aggregate (LECA) as foundation fillers is better than that of sand and gravel. When the operating temperature is 565°C, the average temperatures of each layer of LECA, sand, and gravel are 131.73°C, 141.91°C, and 149.27°C, respectively. And the seepage depths in light expanded clay aggregate, sand, and gravel are 482 mm, 223 mm, and 270 mm, respectively. It is found that the seepage depth of molten salt distinctly increases with higher operating temperature in all kinds of fillers. Nevertheless, the seepage depth of molten salt in the multi‐layer fillers diminishes with the increase of the thickness of the sand or gravel layer. The results obtained from this research would be helpful for the engineering design of storage tank foundations and reduce economic losses and the complexity of accident handling.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.