Abstract
Measurement while drilling (MWD) enables real-time measurement of downhole conditions for directional drilling, but most commercial MWD telemetry techniques suffer from limited transmission speeds. Acoustic telemetry has the potential for significantly faster transmission speeds, but it has limited range due to drill string attenuation and noise. A common solution to this is to use acoustic repeaters, which incur high costs and require complex implementation. Instead of using repeaters, we utilized two carrier frequencies at the modes to transmit redundant data in combination with a lock-in amplifier (LIA) to extract the signals from the carriers. The extracted signals were then fused at the receiver to increase signal fidelity. An experimental setup was developed to transmit acoustic signals through a simulated drill string. The signals were first attenuated by the rubber section of the simulated drill string. The results show that the proposed system was able to achieve error-free transmission of packets at 64 bps up to 1.95 km without the use of a repeater which is orders of magnitude faster than current commercial MWD methods (mud-pulse and electromagnetic).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have