Abstract
ABSTRACT Solar stills are a potential solution to address water scarcity but have low production levels. This study explores using magnets in a pyramidal distiller to increase yield. The effects of magnets at different water heights (1.5, 2, 2.5, and 3 cm) and non-magnetized iron poles were investigated. Various magnetic field intensities (136, 175, and 220 mT) and magnet locations (above and below the basin) were studied. Also, two types of stills, made of sheet metal and acrylic, were compared. Results showed that magnets at 136 mT improved production by 24% (3600 mL/m2/day) compared to the non-magnetized still (2900 mL/m2/day). Non-magnetic plates increased productivity by 12% compared to the still without magnets. The magnetic field alone accounted for a 12% increase. The maximum productivity and energy efficiency were 24% and 39.6% at 1.5 cm water depth, and 11% and 36.6% at 3 cm. Increasing magnetic field intensity from 136 mT to 220 mT raised yield and thermal efficiency to 34% and 41.1% respectively. The acrylic-based still with magnets achieved a 10% increase in distillate (3300 mL/m2/day) compared to the non-magnetized version (3000 mL/m2/day).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
