Experimental Study on Punching Performance of Recycled Aggregate Concrete Thin Wallboard with Single-Layer Reinforcement

Abstract

Recycle Aggregate Concrete (RAC) is a common “green” product used for a variety of purposes, although the durability and strength of the material still need more research to adequately determine influences on these parameters. The failure pattern, punching bearing capacity, and deflection variation of wallboard of both ordinary concrete and RAC with various rebar reinforcement diameters and spacing were analyzed. Based on experimental data, the ABAQUS finite element analysis of the thin wallboard was performed, and the calculated results are in good agreement with the experimental results. The results show that the failure characteristics of ordinary concrete wallboards and RAC wallboards are similar, but the brittleness of the RAC specimens is more significant. Under the same reinforcement ratio, concrete material, whether new or recycled, had little effect on the punching bearing capacity of the specimens. In the case of a low reinforcement ratio, increasing the reinforcement ratio (decreasing the spacing of steel bars) can effectively improve the bearing capacity of the wallboard. Under the same reinforcement ratio, the wallboard with larger diameter and larger spacing has a higher bearing capacity and less deformation after failure.