Abstract

Summary The process of proppant filling within complex fractures is a key factor that determines the effects of volumetric fracturing operation in shale. To address the need of simulating proppant transport within the complex fractures, a large size visual simulation equipment of particle transport within complex fractures was built. The equipment considers roughness and fluid leakoff on the fracture wall and includes branched fractures of different angles. We ensured that the fluid flow and proppant flow were similar to those in the actual fracture and carried out experiments to obtain the influence of operation parameters and fracture parameters on proppant transport, also including injection of special proppants and channel fracturing. Then, we quantified proppant placement through standardized processing of dune shape pictures. The results show that under the influence of perforation, the near-wellbore dune is distributed in a slope shape, and an increase in the perforation density causes dune migration toward the wellbore and proppant accumulation to a certain height within the wellbore. The carrier fluid flow velocity change from 1.0 to 1.5 m/s within the fracture has the greatest effect on the dune equilibrium height (DEH). The dune height only varies slightly after the proppant concentration reaches 12%. Small size proppants have better transport capacity in the slickwater, and the large size proppants are likely to settle down. Combination injection of increasing proppant size improves the filling effect of complex fractures significantly. Pulse injection and stopping pump during fracturing operation have little effect on the transport of conventional proppants. Nevertheless, stopping pump leads to a significant increase in the dune height of the lower density proppants. An increase in the flow rate within the branched fracture leads to the transition in the dune shape from triangle to trapezoid and rectangle. The dune height within the major fracture determines those within the branched fracture, and the proppant volume flowing into the branched fracture determines the dune length. Proppant accumulation within the branched fracture enhances the difficulty in the diversion of carrier fluid to the branched fracture. The proppant tumble area increases within the inclined fracture, which is conductive to proppant transport. The proppants form the dune through bridging within the horizontal fracture, and the dune is less stable than that within the vertical fracture. A reduction in the proppant density and size leads to a significant increase in the proppant transport distance, and the convection effect by concentration difference of the ultralow-density (ULD) proppant is of great significance for propping of the microfractures. In channel fracturing, the proppant and fiber agglomerates are formed at the fracture point with the relatively large fluid leakoff and wall roughness, and the agglomerates grow laterally against the fracture fluid flow direction. A reasonable increase in the injection rate enhances the connectivity between the channels within the fracture. This study provides guidance for the optimization of volumetric fracturing parameters.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call