Experimental Study on Properties of Concrete Using Shredded Plastic Waste and M-Sand as Partial Replacement of Fine Aggregate

Abstract

Disposal of large quantity of plastic causes land, water, and air pollution etc.., so a study is conducted to recycle the plastic in concrete. This work investigates about the replacement of natural aggregate with non-biodegradable plastic aggregate made up of mixed shredded plastic waste in concrete. Several tests are conducted such as compressive strength of cube, compressive strength of cylinder, flexural strength test of prism to identify the properties and behavior of concrete using shredded plastic aggregate. Replacement of fine aggregate weight by 0%, 5%, 10%, 15%, 20% with shredded plastic fine (PF) aggregate and manufactured sand (M-Sand). Totally 30 cubes, 30 cylinders and 30 prisms are casted to identify the compressive strength, cylindrical compressive strength, and flexural strength respectively. Casted specimens are tested at 7, 14 and 28 days. The identified results from concrete using shredded plastic aggregate are compared with conventional concrete. Result shows that initially there is increase in mechanical properties then there is reduction in mechanical properties due to addition of shredded plastic aggregate added concrete. This reduction in strength is mainly due to poor bond strength between cement and shredded plastic aggregate.